Our titanium products has all insoluble electrodes are manufactured with Titanium as basic component. Occasionally electrodes are also made from Niobium. In general electrodes are available in the form of plate, mesh, rod, wire, ribbon and customs built.

Grades - Titanium (Grade I & II)

Specifications
International Specifications - ASME SB-265
Round Bar/Wire - ASME SB-348 ASTM F-67 AMS 4921 ,AMS 4928,AMS 4957, AMS 4958 , AMS 4965, AMS 4967 ,AMS 4971, AMS 4978, AMS 4979
Pipe -ASME SB-337, ASME SB-338
Tube -ASME SB-337, ASME SB-338 AMS 4942 AMS 5582, AMS 5583
Fittings -ASME SB-363
Forgings -ASME SB-381 MIL-T-9046, MIL-T-9047
Weld Wire -ASME SB-337, ASME SB-338

Titanium Pipes

Titanium Seamless Pipe
1/8" NPS through 6" NPS (Sch 10S and Sch 40S)

Titanium Welded Pipe
3/4" NPS through 24" NPS (Sch 10S and Sch 40S)
[May be Continuous Rolled & Welded to 8" Sch 40S or Brake Press formed and Welded from 6" NPS and above.]

TOP

Titanium Tubes

Titanium Seamless Tube
OD - 1/8" (3.18 mm) to 1-1/2" (38.1mm) Wall - .016" (4 mm) to .065" (1.65 mm)

Welded Tube
OD - 1/2" (12.7 mm) to 2" (50.8 mm) Wall - .028" (.71 mm) to .065" (1.65 mm)

TOP

Titanium Plate/Sheet

	Titanium Plate .1875" to 3" x up to 96" Wide x to 240" Long [Wider Widths, Custom and Special Shapes (Circles, Rectangles, Squares and Others) available on request.] Plate can be Sheared, Saw Cut or Water-Jet Cut to Standard sizes or any Custom size (dependent upon Customer preference and size considerations)
Titanium Sheet .020" to under .187" x up to 48" Wide x Length Standard sizes: 48" Wide X 120" Long [Sheet can be sheared to any Custom size.] [By ASTM definition, Sheet is product .187" (4.75 mm) and under in thickness and 24" (610 mm) or more in width.]

TOP

Titanium Flanges

Blind Flange
1/2" through 24" NPS (ANSI) & 12" through 60" (MSS) Class 150 through 2500

Slip-On Flange
1/2" through 24" NPS
(Larger Sizes available on request)

Weld Neck Flange
1/2" through 60" NPS (ANSI) [Raised Face only]
Class 150 through 2500 12" through 60" NPS (MSS)
Class 150 through Class 900 [Raised Face]
Class 300 through Class 900 [Ring-Type Joints

Threaded Flange
1/2" through 24" NPS
Class 150 through 1500
(to 12" NPS max. for Class 2500)
(Larger Sizes available on request)

Lap Joint Pipe Flange
1/2" through 24" NPS
Class 150 through 300
(Larger Sizes available on request)

TOP

Titanium Fittings

ELBOW
Elbow Short Radius Butt-Welding 90°
1" through 24" NPS Sch 1OS and 40S
Elbow Long Radius Butt-Welding 45
1/2" through 48" NPS Sch 10S and 40S
Elbow Threaded 45°
1/4 " through 4" NPS
Elbow Threaded 90°
1/4 " through 4" NPS
Butt Welding Short Branch Straight Tee
1/2" through 24" NPS
(MSS) Sch 10S and 40S

TOP

Titanium Fastners

	Titanium Bolts Titanium Hex Head Bolt 8-32 through 3/4-10 Lengths through 4" Titanium Nuts Titanium Hex Nut 8-32 through 3/4-10 Titanium Screws
Titanium Washers Titanium Flat Washer #8 through 3/4"

TOP